HDS03.2-W100N-HA08-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
1 Seconds
The Bosch Rexroth Indramat HDS03.2-W100N-HA08-01-FW is a drive controller from the HDS Drive Controllers series and is part of the DIAX04 controller family. It features an analog command communication interface, a built-in internal air blower for cooling, and operates at a rated current of 100 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W100N-HA08-01-FW belongs to the HDS Drive Controllers series. As a drive controller, it forms the power and control link between a DIAX04 servo drive system and the connected motor, supplying regulated current for closed-loop operation and responding to motion commands from the machine control. The module is intended for coordinated servo applications that depend on stable current regulation and fast response to changing loads. It is used in automated machining cells, material-handling lines, and packaging equipment where precise axis behavior is required.
This model uses an analog command communication interface, so the axis card or PLC must provide differential voltage or current signals instead of fieldbus messages. This arrangement fits systems that generate command values directly in analog form and pass feedback values through the same style of control structure. It sits inside the DIAX04 rack, where the controller shares a common backplane with matching auxiliary modules and bus rails. Thermal loading is removed by a built-in internal air blower that draws cabinet air across the heat sinks, so no external heat exchanger is required. The controller is rated for a continuous output of 100 A, giving it the current capacity needed for medium-to-large synchronous or induction motors during acceleration. The product is part of Line 03 in the series, so connector layout and diagnostic indicators follow the same design generation as other 03-line units.
Within the HDS Drive Controllers platform, the unit operates as a coordinated axis module for precise torque, velocity, and position loops. Produced by Bosch Rexroth Indramat, it supports Indramat motor feedback formats and emergency-stop circuits used across that automation platform. Classified as an HDS Drive Controller, the device does not contain embedded motion programs, so control logic remains in the master NC or PLC instead of inside the drive. The product is Version 2, which adds higher-resolution current measurement and improved fault logging during operation.
Frequently Asked Questions about HDS03.2-W100N-HA08-01-FW:
Q: What type of command communication interface does the HDS03.2-W100N-HA08-01-FW use?
A: This drive controller features an analog command communication interface.
Q: Which controller family does the HDS03.2-W100N-HA08-01-FW belong to?
A: The HDS03.2-W100N-HA08-01-FW is part of the DIAX04 controller family.
Q: How is the HDS03.2-W100N-HA08-01-FW cooled during operation?
A: A built-in internal air blower is used as the cooling method for this drive controller.
Q: What is the rated current of the HDS03.2-W100N-HA08-01-FW drive controller?
A: This model has a rated current of 100 A, supporting high current applications.
Q: What version is the HDS03.2-W100N-HA08-01-FW drive controller?
A: The HDS03.2-W100N-HA08-01-FW is designated as Version 2 of its model line.
