Product Description:

The HDS03.2-W075N-HS47-01-FW is a drive controller produced by Bosch Rexroth Indramat. It manages power delivery and motion commands between a DIAX04 servo stack and connected synchronous motors, allowing the drive system to regulate torque, speed, and position during operation. In automated packaging, printing, and material-handling equipment, the controller interprets network commands and converts them into regulated motor action for coordinated axis movement. By combining power electronics and control functions in one unit, it serves as a central element in multi-axis motion systems that require repeatable response and stable axis regulation.

Its command channel uses the SERCOS fiber-optic interface, which supports deterministic cyclic data exchange for synchronized motion on a real-time ring. The controller has a continuous output current of 75 A, which is the maximum phase current available during normal continuous operation under nominal thermal conditions. Cooling is handled by a built-in air blower that moves cabinet air across the heat sink, removing internal losses without external ducting. As part of the DIAX04 platform, the unit uses the same general mounting pattern and connector arrangement found on related controllers in that system.

The unit is part of Line 03, which uses a specific power section layout with standardized bus bars and connector positions. It is Version 2, so the matching parameter set must correspond to that revision of the electrical layout. Classified as an HDS drive controller within the HDS Drive Controllers series, it uses shared diagnostic codes and parameter names that are common across the motion platform. This common structure supports consistent setup and operation when the controller is installed with other compatible modules in the same system.