HDS03.2-W075N-HS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
10 Seconds
The Bosch Rexroth Indramat HDS03.2-W075N-HS is an HDS Drive Controller from the HDS Drive Controllers series. It belongs to the DIAX04 controller family and features a rated current of 75 Amps with SERCOS command communication interface. The unit uses a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W075N-HS is a drive controller produced by Bosch Rexroth Indramat for the HDS Drive Controllers series. As a digital servo axis unit, it manages power conversion and closed-loop regulation between a motion control system and connected motors. In automated cells, the controller delivers vector-regulated power, monitors axis response, and returns status data to higher-level PLCs so multiple motion channels can run with synchronized speed and position control. This arrangement allows the controller to serve as the electrical link between the central control system and the motor while maintaining fast response to changing load conditions.
Communication to the master device is carried over the SERCOS fiber-optic bus, and this real-time interface synchronizes position and velocity commands across the ring with deterministic timing. The controller belongs to the DIAX04 family, so it follows the modular mechanical layout and parameter structure used by related drives in the same platform. Thermal management is handled by a built-in air blower, which circulates air through the heat sink without external ducting and helps stabilize internal operating temperature during sustained load. The unit provides a continuous output of 75 A under rated ambient conditions, and it is part of Line 03 in the HDS platform.
The drive is Version 2. It is an HDS Drive Controller and can be paired with MSM or MKD servo motors in applications that require regulated torque, speed, and position feedback. Control logic and the power stage share the same backplane, which reduces internal wiring points and keeps signal paths short between the regulation electronics and the inverter section. That layout also supports compact installation in multi-axis cabinets where several controller modules operate beside shared supply components.
Frequently Asked Questions about HDS03.2-W075N-HS:
Q: What communication interface is used by the HDS03.2-W075N-HS drive controller?
A: The HDS03.2-W075N-HS utilizes a SERCOS command communication interface for real-time data exchange.
Q: What is the rated current of the HDS03.2-W075N-HS drive controller?
A: The rated current for this drive controller is 75 A, allowing it to handle high power loads.
Q: How is the HDS03.2-W075N-HS drive controller cooled during operation?
A: Cooling is provided by a built-in internal air blower, eliminating the need for external cooling systems.
Q: Which version is the HDS03.2-W075N-HS drive controller part of?
A: The HDS03.2-W075N-HS belongs to version 2 of the HDS Drive Controllers.
Q: What controller family does the HDS03.2-W075N-HS belong to according to its specifications?
A: This drive controller is part of the DIAX04 controller family from Bosch Rexroth Indramat.
