HDS03.2-W075N-HA12-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
0 Seconds
The Bosch Rexroth Indramat HDS03.2-W075N-HA12-01-FW is a drive controller from the HDS Drive Controllers series and the DIAX04 controller family. It features a rated current of 75 Amps, a built-in internal air blower for cooling, and uses an analog command communication interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.2-W075N-HA12-01-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. It is installed in multi-axis automation equipment to modulate current supplied to connected motors so that velocity and position remain under closed-loop control. In a coordinated drive rack, it receives command values from the motion system and regulates axis behavior during acceleration, steady running, and positioning. The device forms part of the DIAX04 motion platform and occupies one slot in the rack, serving as the electronic interface between a higher-level motion controller and the power section of an axis. Because the controller works within a shared platform, several axes can be arranged side by side without changing the basic rack concept or signal flow.
At the power stage, the unit delivers a rated output of 75 A, supporting motor loads that draw substantial startup and dynamic current without derating. Motion commands are routed through an analog interface that converts voltage references from a supervisory PLC into internal torque setpoints. This style of command input suits systems that use analog speed or torque references instead of digital motion links. Internal heat produced by the switching elements is removed through a built-in air blower, eliminating the need for cabinet ducting and helping keep semiconductor junctions within safe operating limits. The controller is part of Line 03, which identifies the third design line used within this platform. That layout keeps the mechanical format consistent with other modules installed in the same multi-axis rack.
The drive is Version 2. It is classified as an HDS Drive Controller, and its dimensional and wiring conventions follow the platform layout used for coordinated multi-axis assemblies. Version 2 marks the revision level of the unit while preserving the established controller format used in the series. This arrangement lets the module fit standard rack positions and connect with companion supply and control hardware in the same system. The unit keeps its role focused on regulated axis control, linking reference signals from the motion controller to the motor power stage so commanded movement can be carried out with stable electrical response.
Frequently Asked Questions about HDS03.2-W075N-HA12-01-FW:
Q: What type of command communication interface does the HDS03.2-W075N-HA12-01-FW drive controller use?
A: The HDS03.2-W075N-HA12-01-FW uses an analog command communication interface.
Q: How is the HDS03.2-W075N-HA12-01-FW drive controller cooled?
A: This drive controller is equipped with a built-in internal air blower for cooling.
Q: What is the rated current of the HDS03.2-W075N-HA12-01-FW drive controller?
A: The rated current for the HDS03.2-W075N-HA12-01-FW is 75 A, supporting high power requirements.
Q: What version is the HDS03.2-W075N-HA12-01-FW drive controller?
A: The HDS03.2-W075N-HA12-01-FW belongs to version 2 in its product series.
Q: Which controller family does the HDS03.2-W075N-HA12-01-FW belong to?
A: This model is part of the DIAX04 controller family from Bosch Rexroth Indramat.
