HDS03.1-W100N-HA32-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat HDS03.1-W100N-HA32-01-FW is a drive controller from the HDS Drive Controllers series and the DIAX04 family. It features an analog command communication interface and a built-in internal air blower for cooling. This unit has a rated current of 100 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W100N-HA32-01-FW belongs to the HDS Drive Controllers series produced by Bosch Rexroth Indramat. This unit functions as a digital drive controller that supplies regulated current to Indramat servo drives within the DIAX modular automation platform. In industrial automation, the controller governs motor torque and speed through closed-loop current regulation so positioning and process axes can follow programmed profiles.
The command interface is electrical and accepts an ANALOG reference signal, allowing drives in legacy or mixed-control installations to receive continuous voltage or current commands. Within the DIAX platform it is identified as part of the DIAX04 controller family, which standardizes dimensions and bus links for multi-axis racks. Thermal management is handled by a built-in internal air blower; this fan draws cabinet air through the heatsink fins so the module can dissipate switching losses without external ducting. The power section is sized for a continuous output of 100 A, enabling it to drive high-torque motors on presses, gantries, or injection units. Hardware coding places it in line 03, indicating the performance class and connector arrangement that must be matched when replacing or extending an axis.
Firmware and hardware are locked to version 1, guaranteeing parameter compatibility across installations produced in the same build cycle. The product identifier also confirms it is an HDS Drive Controller, and the manufacturer lists no other versions for this specific ordering code, simplifying spare-part logistics. Engineers integrating the unit should observe the stipulated rated current limit during configuration so that drive sizing, cable cross-section, and protective devices remain within allowable thermal margins.
Frequently Asked Questions about HDS03.1-W100N-HA32-01-FW:
Q: What type of command communication interface does the HDS03.1-W100N-HA32-01-FW drive controller utilize?
A: The HDS03.1-W100N-HA32-01-FW uses an analog command communication interface for control input.
Q: How is the HDS03.1-W100N-HA32-01-FW cooled during operation?
A: This drive controller is equipped with a built-in internal air blower for cooling.
Q: What is the rated current of the HDS03.1-W100N-HA32-01-FW drive controller?
A: The rated current for this drive controller is 100 A, allowing support for high-power applications.
Q: Which controller family does the HDS03.1-W100N-HA32-01-FW belong to?
A: The HDS03.1-W100N-HA32-01-FW is part of the DIAX04 controller family.
Q: What line is the HDS03.1-W100N-HA32-01-FW drive controller assigned to?
A: This model is classified under line 03 within the HDS Drive Controllers series.
