HDS03.1-W100N-HA29-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat HDS03.1-W100N-HA29-01-FW is a drive controller from the HDS Drive Controllers series. It features an analog command communication interface and a built-in internal air blower for cooling, with a rated current of 100 Amps. This product belongs to the DIAX04 controller family.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W100N-HA29-01-FW belongs to the HDS Drive Controllers series produced by Bosch Rexroth Indramat. As an axis controller it regulates current, velocity, and position for servo and spindle drives in modular DIAX04 systems, supplying the closed-loop commands that coordinate motion in machining centres, printing lines, and material-handling stations.
This unit exchanges set-point and feedback data over a ANALOG command communication interface, allowing straightforward signal wiring to legacy PLCs. It is classified within the DIAX04 controller family, so its firmware and slot geometry match other modules in that rack. A built-in internal air blower draws cooling air through the card cage to remove switching losses without relying on cabinet ventilation. The unit is specified for a continuous motor output of 100 A, so drive sizing calculations must confirm that peak acceleration currents remain beneath this figure. Within the overall product coding, the device is assigned to Line 03, which indicates the performance envelope and connector style used throughout that line.
The firmware carrier identified as Version 1 allows application-specific parameter blocks to be flashed without altering hardware. Because all power semiconductors, logic boards, and sensors are built by Bosch Rexroth Indramat, service parts and diagnostic tools are shared across the platform. In addition, the controller resides in the HDS Drive Controllers series, so its gate-drive timing and bus clamps coordinate with matching supply and regulator modules.
Frequently Asked Questions about HDS03.1-W100N-HA29-01-FW:
Q: What type of command communication interface does the HDS03.1-W100N-HA29-01-FW drive controller support?
A: The HDS03.1-W100N-HA29-01-FW uses an analog command communication interface.
Q: Which controller family does the HDS03.1-W100N-HA29-01-FW belong to?
A: This model is a member of the DIAX04 controller family by Bosch Rexroth Indramat.
Q: What cooling method is used in the HDS03.1-W100N-HA29-01-FW drive controller?
A: It features a built-in internal air blower for cooling during operation.
Q: What is the rated current of the HDS03.1-W100N-HA29-01-FW drive controller?
A: The rated current of the HDS03.1-W100N-HA29-01-FW is 100 A for continuous operation.
Q: What version is the HDS03.1-W100N-HA29-01-FW drive controller?
A: The HDS03.1-W100N-HA29-01-FW is Version 1 in the series line.
