HDS03.1-W100N-HA06-01-FW Bosch Rexroth Indramat

Product Description:

The HDS03.1-W100N-HA06-01-FW is a drive controller produced by Bosch Rexroth Indramat and assigned to the HDS Drive Controllers series. Installed in multi-axis automation frames, the unit regulates servo-motor current and velocity in handling machines, packaging lines, and machining centers. Its purpose is to translate reference commands from a higher-level PLC into precise motor voltages, allowing coordinated and repeatable motion inside industrial equipment.

At the control terminals the unit accepts a Command Communication Interface implemented as ANALOG voltage signals, so speed or torque set-points are delivered as proportional ±10 V references. The power section is rated for a continuous output of 100 A, giving adequate headroom for medium-frame servomotors that demand high peak currents during acceleration. Thermal management is handled by a Built-in Internal Air Blower that pulls cabinet air through the heat sink; this eliminates external fan trays and keeps the electronics within the permissible temperature rise. Hardware belongs to Line 03, meaning the mechanical dimensions and connector locations correspond to the third design iteration in the HDS platform. These characteristics allow the controller to occupy a standard slot in tightly packed drive racks without custom mounting hardware.

Functionally the device integrates into the DIAX04 controller family, so firmware and parameter structures are shared across the range and facilitate uniform commissioning. This hardware is identified as Version 1, indicating the first release of its electronic board layout and microcode. The product type is an HDS Drive Controller. In multi-axis systems the unit can be combined with matching supply modules and communication cards to form a scalable motion pack, delivering synchronized positioning while maintaining the electrical limits described above.