HDS03.1-W075N-HS94-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat HDS03.1-W075N-HS94-01-FW is a HDS Drive Controller in the DIAX04 controller family and line 03 series. This model features a SERCOS command communication interface, has a rated current of 75 Amps, and uses a built-in internal air blower for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W075N-HS94-01-FW is a modular axis controller produced by Bosch Rexroth Indramat and supplied within the HDS Drive Controllers series. It operates as a multi-axis drive interface inside DIAX04 motion systems, converting higher-level bus commands into regulated current for attached motor modules and thereby coordinating position, velocity, and torque loops in automated machinery.
This unit exchanges set-point and diagnostic data over the optical SERCOS network; the value is defined in the specification as the Command Communication Interface and enables deterministic, cyclic updates between the drive and the master controller. Its power stage is dimensioned for a continuous output of 75 A, allowing it to energize large synchronous or induction motors without saturation at full load. Thermal management is handled by a Internal Air Blower that is built into the housing, so the module can be mounted in a cabinet row without requiring external ducting. Within the drive platform, it belongs to the DIAX04 controller family, giving it firmware compatibility with other axes that share the same cycle times and parameter structure.
Configuration-level identifiers supplement the electrical ratings. The hardware is assigned to Line 03, marking it as the third design iteration within the product line. Control firmware runs on the baseboard stamped as Version 1; this simplifies replacement because parameter files created for one unit load directly onto any controller that carries the same version code. The catalogue also states “Other versions: none,” indicating that no parallel hardware variants exist for this current rating. Its classification as an HDS Drive Controller ensures compatibility with standard DIAX04 power supplies and motor feedback modules used throughout the platform.
Frequently Asked Questions about HDS03.1-W075N-HS94-01-FW:
Q: What command communication interface is available on the HDS03.1-W075N-HS94-01-FW drive controller?
A: The HDS03.1-W075N-HS94-01-FW supports SERCOS for its command communication interface.
Q: What is the rated current output of the HDS03.1-W075N-HS94-01-FW controller?
A: This model provides a rated current output of 75 A for connected systems.
Q: What cooling method does the HDS03.1-W075N-HS94-01-FW drive controller use?
A: The cooling system of this unit uses a built-in internal air blower.
Q: Which controller family does the HDS03.1-W075N-HS94-01-FW belong to?
A: The HDS03.1-W075N-HS94-01-FW belongs to the DIAX04 controller family.
Q: What is the line and version designation of the HDS03.1-W075N-HS94-01-FW drive controller?
A: This drive controller is part of line 03 within its series and is version 1.
