HDS03.1-W075N-HA21-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HDS03.1-W075N-HA21-01-FW is a drive controller from the HDS Drive Controllers series and belongs to the DIAX04 controller family. It features a rated current of 75 Amps and uses a built-in internal air blower for cooling. This drive controller supports an analog command communication interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W075N-HA21-01-FW drive controller is produced by Bosch Rexroth Indramat and belongs to the HDS Drive Controllers series. Designed for multi-axis automation racks, it accepts motion commands from higher-level control systems and regulates three-phase output to servo or spindle motors, keeping velocity and torque within programmed limits during industrial processes such as packaging, printing, or machining.
The unit exchanges set-point and feedback signals through an ANALOG command communication interface, which permits straightforward wiring to PLCs that issue ±10 V velocity or torque references. Inside the DIAX04 platform the controller is classified under the DIAX04 family, allowing it to share backplane power and diagnostic tools with companion modules. Thermal management is handled by a built-in internal air blower; this fan directs cabinet air across the heatsink so the device can deliver continuous current without external ducting. The power stage supports a maximum continuous output of 75 A, enabling it to drive large synchronous or induction motors during sustained production cycles. Electrically it is marked as line 03, identifying the power rating group and connector layout used across this hardware generation.
This HDS Drive Controller is shipped as hardware version 1, ensuring firmware boards released for the first revision slot directly onto the control card labeled 01-FW. Within the wider series of HDS Drive Controllers the module fits the standard width and bus position dictated by Bosch Rexroth Indramat’s packaging rules, simplifying rack assembly for multi-axis systems. The controller’s design lineage under Bosch Rexroth Indramat keeps service parts, parameter sets, and diagnostic procedures consistent across coordinated drives.
Frequently Asked Questions about HDS03.1-W075N-HA21-01-FW:
Q: What type of command communication interface does the HDS03.1-W075N-HA21-01-FW use?
A: The HDS03.1-W075N-HA21-01-FW drive controller communicates using an analog command communication interface.
Q: Which controller family does the HDS03.1-W075N-HA21-01-FW come from?
A: This drive controller belongs to the DIAX04 controller family, which is a Bosch Rexroth Indramat offering.
Q: What cooling method is used in the HDS03.1-W075N-HA21-01-FW drive controller?
A: The HDS03.1-W075N-HA21-01-FW features a built-in internal air blower for cooling to maintain proper operating temperature.
Q: What is the rated current capacity of the HDS03.1-W075N-HA21-01-FW controller?
A: This model is rated for a continuous current of 75 A during operation.
Q: What line does the HDS03.1-W075N-HA21-01-FW belong to within its series?
A: The HDS03.1-W075N-HA21-01-FW is from line 03 of the HDS Drive Controllers series.
