HDS03.1-W075N-H
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat HDS03.1-W075N-H is part of the HDS Drive Controllers series and belongs to the DIAX04 controller family. This drive controller features a rated current of 75 Amps and uses a built-in internal air blower for cooling. It is classified as a product line 03, version 1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS03.1-W075N-H belongs to the HDS Drive Controllers series manufactured for modular motion systems. It is designed to regulate three-phase servo or spindle axes inside the wider DIAX04 platform, allowing coordinated positioning and speed control when paired with compatible power supplies and feedback modules. Within an industrial automation cabinet, this controller acts as the interface between higher-level PLC commands and the motor windings, converting setpoints into precisely metered current.
The controller is part of the HDS Drive Controllers series and integrates into the DIAX04 multiaxis family without additional adapter plates because its mechanical footprint follows the shared mounting grid. Its power section is rated for a continuous output of 75 A, meaning the connected motor phases can draw that current indefinitely under rated ambient conditions. Thermal management is handled by a Built-in internal air blower; this fan pulls cabinet air across the heatsink so external ducting is unnecessary, but a clearance zone is still required for airflow. Product identification indicates Line 03, confirming hardware refinements such as improved gate-drive circuits and updated diagnostic LEDs introduced for that line revision. These attributes collectively define the electrical and thermal limits that must be considered when selecting supply transformers, protective fusing, and motor cable cross-sections.
The unit is produced by Bosch Rexroth Indramat as hardware Version 1, so its firmware loading routines and parameter memory size correspond to this first hardware iteration. It is classified as an HDS Drive Controller, giving it standardized node addresses and balancing resistors for the shared DC bus used by other HDS axes. When installed inside a DIAX04 rack, the controller receives logic power from the bus rail and exchanges status bits with neighboring modules through the backplane connector.
Frequently Asked Questions about HDS03.1-W075N-H:
Q: Which controller family is the HDS03.1-W075N-H part of from Bosch Rexroth Indramat?
A: The HDS03.1-W075N-H belongs to the DIAX04 controller family.
Q: What cooling method is used by the HDS03.1-W075N-H drive controller?
A: This drive controller uses a built-in internal air blower for cooling.
Q: Which line does the HDS03.1-W075N-H drive controller belong to?
A: The HDS03.1-W075N-H is a Line 03 variant in the HDS series of drive controllers.
Q: What is the rated current of the HDS03.1-W075N-H drive controller?
A: This model is rated for a continuous current of 75 A during operation.
Q: What version is the HDS03.1-W075N-H drive controller from Bosch Rexroth Indramat?
A: The HDS03.1-W075N-H is Version 1 of its product model by Bosch Rexroth Indramat.
