Product Description:

The HDS02.2-W040N-HS59-01-FW is a drive controller in the HDS Drive Controllers series produced by Bosch Rexroth Indramat for multi-axis automation on the DIAX04 platform. It governs connected servo or main spindle drives and executes motion commands from higher-level control systems. This allows coordinated positioning, speed regulation, and torque control across factory machinery. In a multi-axis machine, it serves as the power and control stage between the central motion system and the motor, so commanded moves can be carried out with repeatable timing. That role makes it suitable for equipment that depends on synchronized axis behavior during production.

This model communicates with the motion control layer over the SERCOS fiber-optic interface, allowing deterministic real-time data exchange between the controller and the PLC. A built-in air blower moves cooling air across the power electronics so the device can support continuous output without extra cabinet fans. The power section is rated for 40 A of continuous current, which suits medium-power axis modules in the DIAX04 family and supports sustained motor demand. The housing is rated IP 10, so it protects only against large solid objects and must be installed inside a control cabinet. Proper operation is maintained when the ambient temperature stays within +5 to +45 °C, which fits normal indoor industrial conditions.

Installation is permitted up to 1000 m above sea level before output derating is required. The drive uses insulation class C as per DIN VDE 0110, allowing higher internal temperature tolerance during rapid motor acceleration and repeated duty changes. For brief duty cycles, the controller can tolerate cabinet air rising to +55 °C. It may also be stored or transported in conditions ranging from -30 to +85 °C. The product is part of Line 02 and Version 2.