Product Description:

The HDS02.2-W040N-HD12-01-FW drive controller is produced by Bosch Rexroth Indramat and is part of the HDS Drive Controllers series. Within a multi-axis platform, it acts as the axis amplifier that converts DC bus power into controlled three-phase output, letting packaging stations, printing modules, or robotic joints execute programmed motion profiles. The unit integrates with system feedback sensors and enables closed-loop regulation of motor current, speed, and position for accurate, repeatable industrial automation tasks. It is intended for coordinated motion applications where stable axis behavior is required across repeated production cycles.

This controller belongs to the DIAX04 family, line 02 and version 2. It is intended for use with other second-generation modules in the rack. The controller has a continuous output rating of 40 A, which is the maximum motor phase current it can deliver without derating. Thermal energy is removed by a built-in air blower, which supports heat sink cooling during operation. The housing has a protection rating of IP10, which helps guard against accidental contact with internal parts but requires installation in a closed cabinet for dust protection. Reliable operation is permitted at ambient temperatures from +5 to +45 °C, allowing use on typical factory floors.

When mounted up to 1000 m above sea level, the controller maintains full performance, and above this altitude output must be reduced. Windings and internal wiring meet Insulation class C under DIN VDE 0110. If cabinet cooling is limited, operation is still possible up to +55 °C when the output current is reduced to protect internal components. During storage or plant shutdowns, the unit tolerates temperatures from -30 to +85 °C without damage to internal materials. Airflow paths must remain unobstructed so the controller can dissipate heat properly.