HDS02.2-W040N-HA32-01-FW Bosch Rexroth Indramat
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
41 Seconds
The Bosch Rexroth Indramat HDS02.2-W040N-HA32-01-FW is part of the HDS Drive Controllers series and belongs to the DIAX04 controller family. This drive controller features a rated current of 40 A, an analog command communication interface, and uses a built-in internal air blower for cooling. It has an insulation class C and an IP10 protection category, with permissible operation at altitudes up to 1000 meters above sea level.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS02.2-W040N-HA32-01-FW is a modular drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. It serves as the power stage for servo axes in multi-axis systems where coordinated acceleration, deceleration, and speed control are managed by a higher-level drive system. The module converts incoming DC bus power into phase-controlled output, allowing industrial handling systems, printing presses, and machining centers to synchronize motion profiles with the central automation platform.
The unit accepts command values through an analog interface, so velocity or torque references are delivered as ±10 V signals from the control rack. This arrangement supports direct integration with control racks that issue continuous reference values instead of serial fieldbus commands. Motor power is supplied through a continuous output of 40 A, a rating suited to medium-frame servomotors in multi-axis groups. That current level supports steady torque demand on feed axes and transport mechanisms. Heat is removed by a built-in internal air blower, which moves cooling air across the power section. The housing is rated IP 10, so it helps prevent accidental contact with live parts but is not sealed against dust or fluids. For that reason, it is intended for installation inside a protected cabinet rather than in exposed machine areas. Reliable operation is permitted between +5 to +45 °C, and output must be derated above that ambient or when the installation exceeds 1000 m above sea level.
When paired with the DIAX04 family backplane, the controller is part of line 02 and internal version 2. That placement keeps it compatible with the mechanical layout and electrical interconnection used in the platform. The power stage uses Class C insulation according to DIN VDE 0110, which allows higher thermal tolerance than B-class designs. Current reduction begins before the unit exceeds +55 °C. During shipping or storage, the electronics can withstand temperatures from -30 to +85 °C without damage. This range supports warehousing in non-climate-controlled indoor spaces.
Frequently Asked Questions about HDS02.2-W040N-HA32-01-FW:
Q: What type of command communication interface is available on the HDS02.2-W040N-HA32-01-FW?
A: The HDS02.2-W040N-HA32-01-FW supports analog command communication interface for signal input.
Q: What cooling method is utilized by the HDS02.2-W040N-HA32-01-FW drive controller?
A: This model uses a built-in internal air blower for cooling.
Q: What is the rated current of the HDS02.2-W040N-HA32-01-FW?
A: The rated current for this unit is specified at 40 amps.
Q: What is the permissible ambient temperature range for operating the HDS02.2-W040N-HA32-01-FW?
A: Operation is permissible at ambient temperatures from +5°C to +45°C for this controller.
Q: What level of ingress protection does the HDS02.2-W040N-HA32-01-FW offer?
A: The protection category for this product is IP10 according to DIN 40 050 standards.