Product Description:

The HDS02.2-W040N-HA09-01-FW drive controller is manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. Designed for cabinet mounting, it converts incoming DC bus power from a supply module into controlled armature current for a connected servomotor. This allows automated lines to command rapid yet accurate motion in pick-and-place systems, indexing stations, and web-handling equipment. In multi-axis assemblies, the controller supports closed-loop regulation so coordinated axes can follow changing speed and torque demands with stable response.

It exchanges command values with the higher-level controller through an analog interface, so voltage or current setpoints can be used without digital bus hardware. This arrangement fits machines that rely on external motion cards or PLC analog outputs for reference signals. The power bridge is rated at 40 A, allowing continuous output current to the motor windings during steady operation. Thermal energy is removed by a built-in air blower, which cools internal components without external ducting. The enclosure has an IP 10 rating, so the cabinet must provide added protection against dust and accidental contact. The permitted ambient operating range is +5 to +45 °C, which suits most climate-controlled industrial enclosures. The unit is part of Line 02 and is Version 2.

Installation is limited to 1000 m above sea level, and higher elevations require output derating because cooling becomes less effective. For storage and transport, the unit can withstand temperatures from -30 to +85 °C, which supports temporary non-operating exposure during handling and warehousing. During operation, the ambient temperature can reach +55 °C when the output is derated. Insulation is class C, which supports reliable dielectric performance at elevated internal temperatures. The controller is part of the DIAX04 family and is intended for use with matching supply and feedback modules.