Product Description:

The Bosch Rexroth Indramat HDS02.2-W040N-HA06-01-FW is a drive controller positioned in the HDS Drive Controllers series and integrated into the DIAX04 controller family. This unit closes current loops for servo motors, translating motion commands from CNC or PLC systems into controlled three-phase power. By coordinating acceleration, deceleration, and holding functions, it supports precise axis movement in automated assembly cells, material-handling stations, and machining equipment. It is intended for servo axes that require stable torque response during positioning, speed regulation, and controlled stopping.

A continuous output capability of 40 A allows the controller to supply mid-range servomotors during dynamic load changes. Command signals enter through an analog interface, so velocity or torque references can be generated by legacy motion cards or process controllers with simple voltage outputs. Heat produced by the switching devices is removed by a built-in air blower, eliminating the need for external ducting inside a cabinet. Enclosure ingress protection is limited to IP 10 according to DIN 40 050, indicating finger-safe openings but no shielding against dust, oil, or water. Reliable operation is specified for an ambient range of +5 … +45 °C, and the unit is part of Line 02 and Version 2.

The unit can be installed at elevations up to 1000 m above sea level without current derating, and it remains functional up to +55 °C when output is reduced to protect the power components. During shipping or warehouse storage, the electronics withstand temperatures from -30 … +85 °C. Windings and internal wiring use insulation class C per DIN VDE 0110, which supports higher permissible hot spot temperatures than standard class B materials. The higher-temperature insulation helps the internal wiring tolerate elevated winding heat during operation.