Product Description:

The HDS02.2-W040N-HA03-01-FW is a drive controller built by Bosch Rexroth Indramat for closed-loop motion tasks within the HDS Drive Controllers series. As a drive controller, it supplies regulated power and feedback handling for servo axes, allowing coordinated movement in automated machining cells, material handling stations, and packaging lines. Motion commands are received through an analog interface, so velocity and torque references can be supplied by PLC analog outputs or speed potentiometers. It is intended for servo applications that require closed-loop control of speed and torque during synchronized machine movement.

Thermal management is handled by a built-in internal air blower that draws cabinet air across the heat sink, so no external ducting is required. The controller can deliver a continuous phase current of 40 A to connected motors during normal operation. Its enclosure has a protection rating of IP 10, which provides protection against accidental finger contact but does not provide water resistance. Reliable operation is specified for an ambient range of +5 to +45 °C, and installation is permitted up to 1000 m above sea level before output derating applies. Because the housing is open to cabinet air, the unit is intended for installation inside an enclosed cabinet.

As part of the DIAX04 platform, the controller shares a common back-plane bus and parameter structure with related modules in multi-axis racks. The product is part of line number 02 and hardware version 2, which identifies its revision within the series. Storage or shipping can occur between -30 °C and +85 °C, and insulation class C per DIN VDE 0110 supports the internal temperature limits of the unit. If cabinet temperature rises above the continuous operating range, the controller can still operate with reduced current until +55 °C, after which thermal shutdown protects the power electronics.