Product Description:

The HDS02.2-W040N-HS62-01-FW is a drive controller from Bosch Rexroth Indramat in the HDS Drive Controllers series. Designed for the DIAX04 multi-axis platform, the unit converts incoming DC bus power into regulated three-phase output that commands synchronous and asynchronous servo motors in automated production lines. Within an automation cell, it serves as the axis-specific module that receives motion commands, supervises feedback, and executes torque, speed, and position loops so the connected mechanics move accurately and repeatably under varying load conditions. This closed-loop operation helps the machine maintain stable motion even when process demand changes during a cycle.

Motion commands reach the controller through the SERCOS fiber-optic interface, allowing deterministic communication with a higher-level CNC or PLC. During operation, the power section can deliver a continuous output of 40 A, so the matching motor, cabling, and protective devices must be selected for that current level. Thermal energy is removed by a built-in air blower, which keeps component temperatures within an ambient operating range of +5 to +45 °C without requiring external cabinet fans. The housing has an IP10 rating, so it protects against incidental contact with live parts but still requires installation inside a closed electrical enclosure.

The drive maintains full current output up to 1000 m above sea level. Above that altitude, derating applies, and the maximum ambient temperature is +55 °C. For shipping or warehouse storage, the electronics tolerate -30 to +85 °C, which helps protect the unit during non-operating transport and storage periods. Winding insulation follows class C as per DIN VDE 0110, enabling high internal temperatures without dielectric breakdown. The module belongs to line 02 and version 2.