Product Description:

The Bosch Rexroth Indramat HDS02.2-W040N-HA40-01-FW is a modular drive controller in the HDS Drive Controllers series. Designed for multi-axis motion platforms, it provides power staging and closed-loop regulation for AC servo axes used in machining centers, packaging equipment, and material-handling stations. The device translates reference signals into precise current and velocity commands, enabling coordinated motor operation in industrial automation cells. Because of its modular format, it can be installed as part of a larger rack-based drive system where several axes operate together.

Within the controller, reference information is accepted through an analog command interface, permitting ±10 V velocity or torque setpoints from a PLC. This arrangement supports straightforward connection to control systems that use conventional analog motion commands. The hardware belongs to the DIAX04 family and uses line code 02 with version 2, so it fits beside matching modules inside a common supply rack. Thermal management is handled by a built-in air blower, which moves air through the cooling channel and eliminates the need for external cabinet fans. Operation is permitted at installation heights up to 1000 m above sea level, and the unit uses insulation class C according to DIN VDE 0110.

For continuous service, the specified ambient range is +5 to +45 °C for full output, and the controller remains functional up to +55 °C with current derating. Protection is limited to IP10, so the device must be mounted inside a control cabinet that is protected from conductive dust and accidental contact. Cabinet installation also helps shield the open housing from debris in demanding production areas. The power stage can deliver 40 A of output current to a single servo axis, supporting midsize motors with dynamic load cycles. During storage or shipping, the electronics can withstand temperatures from -30 to +85 °C.