HDS02.2-W040N-HA17-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
33 Seconds
The Bosch Rexroth Indramat HDS02.2-W040N-HA17-01-FW is an HDS Drive Controller in the HDS Drive Controllers series. It is part of the DIAX04 family and uses an analog command communication interface. This drive controller features a built-in internal air blower for cooling and has a rated current of 40 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS02.2-W040N-HA17-01-FW drive controller is produced by Bosch Rexroth Indramat for the HDS Drive Controllers series within the DIAX04 automation family. As a modular power and control unit, it interfaces with servo axes to regulate torque, speed, and positioning in multi-axis machining centers, packaging equipment, and material-handling cells. The designation 02 identifies the product line, and version code 2 marks the product revision used for this controller. It is supplied as an HDS drive controller for use in coordinated drive systems that share common cabinet layouts and control architecture.
The controller exchanges setpoints and feedback through an analog command interface, allowing straightforward coupling to legacy CNC or PLC hardware. Internal thermal management relies on a built-in air blower, which draws cabinet air across the power electronics so external ducting is unnecessary. Continuous motor current is supported by a 40 A rated output, and conductor sizing must match this load. Circuit insulation is graded to C according to DIN VDE 0110, so the insulation system can withstand elevated temperatures during high-duty cycles. For basic enclosure safety, the unit carries an IP 10 protection category, so the surrounding compartment must remain free of conductive dust while still providing airflow.
Ambient temperature and installation altitude set the operating limits for this controller. The permissible ambient range is +5 to +45 °C; above this range, output must be reduced, and full derating is required once the environment reaches +55 °C. During storage and transport, the unit can withstand temperatures from -30 to +85 °C without affecting component reliability. Installation sites up to 1000 m above sea level are supported, allowing normal cooling performance under standard air density in ventilated cabinets.
Frequently Asked Questions about HDS02.2-W040N-HA17-01-FW:
Q: What type of command communication interface does the HDS02.2-W040N-HA17-01-FW use?
A: The HDS02.2-W040N-HA17-01-FW supports an analog command communication interface.
Q: What is the rated output current of the HDS02.2-W040N-HA17-01-FW drive controller?
A: This model has a rated current of 40 A, allowing for substantial load handling.
Q: How is the HDS02.2-W040N-HA17-01-FW cooled during operation?
A: Cooling is achieved using a built-in internal air blower in this drive controller.
Q: To which controller family does the HDS02.2-W040N-HA17-01-FW belong?
A: The HDS02.2-W040N-HA17-01-FW belongs to the DIAX04 controller family.
Q: Which line and version does the HDS02.2-W040N-HA17-01-FW represent in its series?
A: This product is from line 02 and version 2 within the HDS series.
