HDS01.1-W050-D Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
32 Seconds
The Bosch Rexroth Indramat HDS01.1-W050-D is an HDS Drive Controller featuring a built-in internal air blower for cooling. It operates within a permissible ambient temperature range of 5 to 45 degrees Celsius and has insulation classification C as per DIN VDE 0110. The controller is suitable for installation up to 1000 meters above sea level and has a protection category of IP10.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS01.1-W050-D is a digital drive controller produced by Bosch Rexroth Indramat for the HDS Drive Controllers series. In multi-axis industrial automation platforms, the unit regulates power conversion and switching so synchronous and asynchronous servo modules receive accurate current and velocity commands. By handling closed-loop drive functions in a compact rack format, it supports coordinated motion in packaging machines, printing presses, and material-handling cells. It interfaces with central supply modules over the Indramat DC bus and reports diagnostic states to higher-level PLCs, which helps the machine control system monitor axis status during operation.
Thermal management is provided by a built-in air blower that directs air across the heat sink without external ducting. Under normal operation, the electronics tolerate an ambient temperature of +5 to +45 °C, and the controller can continue operating with derating up to +55 °C when extra thermal margin is required. The housing has an IP10 rating, so it provides basic protection against accidental contact while relying on the cabinet for additional enclosure protection. Power components use Class C insulation and comply with DIN VDE 0110, supporting reliable dielectric performance under the electrical and thermal stresses found in industrial drive systems.
Installation is permitted up to 1000 m above sea level, where cooling performance and electrical clearances remain within the intended operating range. For transport and storage, the controller withstands temperatures from -30 to +85 °C without damage to coatings, capacitors, magnetic cores, or seals when condensation is avoided. The unit is version 1, indicating the first revision of this HDS controller. This revision fits HDS system layouts that use separate power supply modules and motion cards, and its operating limits make it suitable for enclosed drive cabinets in standard industrial environments.
Frequently Asked Questions about HDS01.1-W050-D:
Q: What is the maximum installation elevation for the HDS01.1-W050-D drive controller?
A: The HDS01.1-W050-D supports installation at elevations up to 1000 meters above sea level.
Q: How is the HDS01.1-W050-D drive controller cooled?
A: Cooling for the HDS01.1-W050-D is provided by a built-in internal air blower.
Q: What insulation class does the HDS01.1-W050-D drive controller have?
A: The HDS01.1-W050-D is classified as insulation class C according to DIN VDE 0110.
Q: What protection category does the HDS01.1-W050-D drive controller offer?
A: The protection category of the HDS01.1-W050-D is IP 10 as per DIN 40 050.
Q: What is the operating temperature range for the HDS01.1-W050-D drive controller?
A: The permissible ambient temperature range for operation is +5°C to +45°C.
