HDS01.1-K025-R Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
50 Seconds
The Bosch Rexroth Indramat HDS01.1-K025-R is an HDS Drive Controller from the HDS Drive Controllers series. It supports installation at elevations up to 1000 meters above sea level and operates within a temperature range of +5 to +45 degrees Celsius. The controller has a protection category of IP 10 and features insulation classification C as per DIN VDE 0110.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HDS01.1-K025-R is a modular drive controller produced by Bosch Rexroth Indramat and used as a closed-loop power stage for Indramat AC servo drives. It coordinates velocity and torque commands in machine tools, packaging systems, and automated handling lines where repeatable axis control is required. By interpreting setpoint data from the system PLC and monitoring motor feedback, the unit adjusts output current so connected axes follow programmed motion profiles with consistent accuracy. This control behavior helps the drive respond to changing load conditions while maintaining the commanded motion. Its compact rack-module format supports centralized motor control in multi-axis automation systems.
A permitted installation height of 1000 m above sea level ensures adequate air density for convection cooling. Operation is supported within an ambient range of +5 to +45 °C, and continuous service up to +55 °C is allowed when the load is reduced. The housing has an IP10 rating according to DIN 40 050, so it provides finger protection but no sealing against dust or fluids and must be mounted inside a control cabinet. Because the enclosure is open to the surrounding cabinet air, the installation space should remain clean and dry during operation. Internal wiring conforms to insulation class C per DIN VDE 0110, providing the dielectric strength needed for the switching voltages generated by the power electronics.
The unit can be stored or shipped between −30 to +85 °C without damage to electronic components, which supports transport and staged installation before the controller is placed in service. These temperature limits apply to storage and shipping rather than energized operation. The controller is Version 1 and works with matching supply and interface modules intended for the same product generation. It belongs to the HDS Drive Controllers series and is classified as an HDS Drive Controller.
Frequently Asked Questions about HDS01.1-K025-R:
Q: What is the permissible ambient temperature range for the HDS01.1-K025-R drive controller?
A: The HDS01.1-K025-R drive controller operates within a permissible ambient temperature range of +5°C to +45°C.
Q: What is the insulation classification of the HDS01.1-K025-R?
A: This model features insulation classification C according to DIN VDE 0110.
Q: What is the maximum permissible ambient temperature de-rated for the HDS01.1-K025-R?
A: The maximum permissible ambient temperature with de-rating for the HDS01.1-K025-R is +55°C.
Q: What is the installation elevation limit for the HDS01.1-K025-R drive controller?
A: This drive controller is intended for installation elevations up to 1000 meters above sea level.
Q: What protection category does the HDS01.1-K025-R drive controller have?
A: The HDS01.1-K025-R offers protection category IP 10 as per DIN 40 050.
