Product Description

The Bosch HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW is an industrial controller. It is used in applications that require accurate servo motor control. Applications of HCS drive controllers include packaging machines, machine tools, food machines and handling systems. The controller has a slot-based architecture that gives operators the flexibility to install plug-in modules of their choice. The HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW is equipped with an integrated multi-encoder interface. An addition multi-encoder interface is installed in slot 2. Communication interface on the controller is Multi-Ethernet. Slots number 3 and 4 on the controller are vacant. Slot 3 is designed for another plug-in module. Slot 4 is designated for a safety module. The HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW is available in an IP20 rated enclosure that is suited to control cabinet mounting. Bosch recommends mounting by attaching the back-side of the drive controller to the cabinet.

Care must be taken to ensure that heated braking resistors at the back of the controller do not cause damage to heat-sensitive devices installed in the same cabinet. The HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW controller dissipates heat inside the cabinet. Therefore operators need to use air conditioning or large cabinets. The HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW controller is designed for 200 to 500 Volts AC mains voltage. It can deliver maximum 54 Amps at its output. The controller works with a standard control panel. The control section on which the controller is based is an advanced control section. Firmware for the HCS01.1E-W0054-A-03-A-ET-EC-EC-NN-NN-FW is ordered separately. Improper controller use can lead to personal injury and equipment damage. Therefore technical personnel working on the controller must implement all relevant safety instructions laid out in the product manual. To minimize risk of installation errors, only trained personnel should install the drive controller and accessories.