Product Description

The Bosch HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW is a digital drive controller. It is equipped with an advanced control section. The control section is that part of the controller that contains the circuits and components that perform the digital processing functions. Other components of the controller include a power section, a control panel and controller firmware. The HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW works with a standard control panel. This control panel features a digital display and a keypad. Operators can use the control panel to monitor the controller and to issue commands. The firmware for the HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW has to be ordered separately. The modular controller contains slots for plug-in modules. Slot 1 contains a multi-encoder interface module that allows controller use with all types of encoders. Slot 2 contains a SERCOS III module for cross-connections. SERCOS III is compatible with Ethernet.

The maximum data rate supported by SERCOS III is 100 Mbps (full-duplex). Physical interface on the SERCOS module is RJ-45 (female). Slot 3 on the HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW is equipped with a Profibus module. Slot 4 is vacant and can be used to accommodate a safety module. AC input rating of the HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW is 200 to 500 Volts AC. The rated maximum current output is 54 Amps. The output is valid for specified ambient conditions that include 0 to 40 degrees Celsius and 0 to 1000 meters altitude. Enclosure of the HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW controller is IP20 rated. The controller should be mounted inside a cabinet for improved environmental protection. The controller dissipated heated air inside the cabinet and cools via natural connection. Smooth airflow is a prerequisite for proper heat dissipation. Therefore suitable inter-device spacing must be ensured.  Only trained personnel should handle and operate the HCS01.1E-W0054-A-03-A-CC-EC-PB-NN-NN-FW controller.