Product Description

The Bosch Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-NN-FW is a reliable drive controller that is compact in nature. The device delivers high efficiency. The unit comes with a control panel. However, the firmware has to be ordered separately. The product features an IP 20 degree of protection. The drive controller is compatible with various other products from the same manufacturer. The device has a BASIC control section. The unit has a multi-Ethernet communication option and a multi-encoder interface. The device should be supplied with a 24 V supply before the DC bus voltage or the mains voltage is applied to its components. The ambient conditions mentioned in the product manual should be observed when installing, transporting, storing, operating, and maintaining the drive controller. The electric parts of the device must be secured properly from reconnection. The rated installation altitude of the product is 1000 meters. The maximum permissible relative humidity of the product at the time of transport and storage is 95% without icing or condensation. The unit is equipped with freely configurable digital inputs and outputs. The LED display is active only with safety bus communication via master communication. The unit has scalable signal processing and firmware. Care should be exercised when using the HCS 01 drive controller. It must be used appropriately as intended by the manufacturer. Inappropriate use will result in property damage and injury to persons. It must be noted that the temperature on the surface of the drive controller can exceed 60°C at the time of operation and even after that. So, safety measures should be observed by the personnel operating the equipment. The device can be used to operate motors from Bosch Rexroth as well as third parties.