Product Description

The HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW drive controller provided by Bosch Rexroth cannot be installed or operated if it is damaged or defective. This drive controller plays a vital role in solar cell production and semiconductor/wafer production, handling and metalizing. The product weighs 2.10kg. This device is sized at 268 x 196 x 70 mm (H x D x W). The unit supports a 1Vpp sin-cos encoder with a Hiperface, EnDat 2.1 or EnDat 2.2 interface or reference track. Its firmware is to be obtained separately and not modified in any form. The controller is operated only with components in the stated combination as well as the configuration of components using the associated firmware and software.

This product operation may be done only after mounting it in the specified position. The device operation is prohibited when the maximum operating temperature is very high. This unit must comply with the safety requirements and regulations of the country where it is used. Its dangerous movements take place when the connected motor has a fault in the way its control takes place. The controller operation even for a brief period is not supported without its grounding connection. The HCS01.1E-W0018-A-03-B-ET-EC-EM-L3-NN-FW drive controller worldwide shipping takes place through reputed logistics agents.  

This product features connectors that cannot be connected or disconnected under load. The device features protection against water and foreign objects by means of its closed housing. This unit comprises components with monitoring functions. Its installation machine must not be operated if the associated emergency stop switch fails to work as intended. The controller has to be in standstill mode before entering the danger zone. This product handling should be done only after wearing safety gloves when its surface is hot. The device has components made of metals like copper, steel and aluminum and synthetic materials. Its equipment grounding conductor is connected to the housing using an M5 x 12 screw with 5Nm tightening torque.