Product Description

The HCS01.1E-W0018-A-03-A-CC-EC-EC-L3-NN-FW is an electrical converter designed by Rexroth Indramat to control the operation of industrial motor by ensuring that the frequency, voltage, and current of electrical energy sent into the motor produces a motor output proportional to pre-determined configuration parameters. This electrical converter is designed according to the IP20 protection class; its housing unit can effectively prevent large solid foreign materials from interfering with the normal operation of the converter. The HCS01.1E-W0018-A-03-A-CC-EC-EC-L3-NN-FW electrical converter features an advanced control panel that provides a user-friendly interface through which the operator can monitor and communicate with the electrical converter in real-time. Before the converter is sent to the end user, it is tested and certified to meet international quality standards. The electrical converter is also fitted with a special type label that makes it possible for it to be easily identified as soon as it is delivered to the end user.

The HCS01.1E-W0018-A-03-A-CC-EC-EC-L3-NN-FW electrical converter contains a special internal air blower designed to generate internal air and regulate the operational temperature of the converter by forced cooling. The continuous input current required by this electrical converter for operation is about 18 amperes; at this current, the converter operates with a mains connection voltage that falls between 110 to about 230 volts. This industrial converter can generate a leakage current of about 3.5 milliamperes during operation. To prevent electrical accidents, the motor should be properly grounded before it is switched on for operation.

The HCS01.1E-W0018-A-03-A-CC-EC-EC-L3-NN-FW electrical converter is also designed with an encoder input interface that is compatible with most standard encoder designs; this makes it possible for the converter to be used with wide range of industrial motors such as the MSM, MSK, and the MS2M industrial motor design.