Product Description

The HCS01.1E-W0018-A-02-E-S3-EC-NN-L4-NN-FW is an 18 Amps rated drive controller. It is available in an IP20 rated housing. Bosch Rexroth has designed the controller for connection to three-phase AC systems. The range of input voltages over which the controller delivers rated output is 110 to 230 Volts AC. Bosch also supplies HCS controllers that operate at 200 to 500  Volts AC. The housing of the HCS01.1E-W0018-A-02-E-S3-EC-NN-L4-NN-FW controller is suited to vertical mounting. During mounting operators must observe the minimum clearances on the sides of the unit. If sufficient space is available, the back side of the unit should be directly mounted to mounting surface in control cabinet. If sufficient clearance is not available, the left side or the right side of the unit can be mounted to the mounting surface.

The HCS01.1E-W0018-A-02-E-S3-EC-NN-L4-NN-FW cools via forced air cooling. Forced air cooling is a method of cooling a device or system by using a fan to circulate cool air over the device or system. This is typically done by using a blower or fan to move air over a heat sink, which is a device designed to dissipate heat from electronic components. The heat sink is usually made of a material with a high thermal conductivity, such as aluminum or copper, and is mounted in close proximity to the device or system that needs to be cooled. Forced air cooling is a relatively simple and cost-effective cooling method that is widely used in many different applications. Integrated communication interface on the HCS01.1E-W0018-A-02-E-S3-EC-NN-L4-NN-FW is SERCOS/EtherCat. The unit supports an integrated multi-encoder interface. A safety module on the unit support two safety features: safe brake control and safe torque off.