Product Description

The HCS01.1E-W0018-A-02-A-CC-EC-EC-NN-NN-FW drive controller produced by Bosch Rexroth has a 01 design code. This controller has two multi-encoder interfaces and a SERCOS 3 master module for cross-communication. The product is incorporated in printing machinery for labeling, label printing, positioning and digital printing. This device has one 14-bit analog input with a +/-10V voltage rating. The unit supports two options for encoder data buffering when it is used with an MSM series motor. It features an 18A maximum current rating. The controller implements Ethernet-based communication. This product should meet sufficient clearance distance requirements at the bottom and top inside its closed housing.

The device operates at 50Hz to 60Hz mains frequency with a tolerance of +/-2%. This unit has to be used only after gaining an understanding of the associated safety instructions. It must never be connected with components and cables that do not have the approval of the manufacturer. The controller is fitted with an advanced control section. This product is not meant for use when the maximum temperature is very high. The device has III overvoltage category in compliance with IEC 60664-1 specifications. This unit needs to be properly and correctly installed, mounted, transported and stored for safe and optimum operation.

The controller may trigger injury due to cutting, hitting, crushing or shearing its surface. It is mandatory to check the voltage rating of its live parts before commencing work to make sure that they are safe to touch. This product needs prevention against unintended startup by isolating its power connection using a safe starting lockout. The device housing reaches a temperature higher than 60°C during operation. This unit cannot be touched immediately after it has been switched OFF. Its equipment grounding connector is connected to the housing of the controller. This HCS01.1E-W0018-A-02-A-CC-EC-EC-NN-NN-FW controller features one-year backup support and is shipped internationally.