Product Description

The Bosch Rexroth HCS01.1E-W0013-A-02-B-ET-EC-EC-L2-NN-FW drive controller must be mounted inside the control cabinet using standard mounting on the back-side. This drive controller helps in filling and closing, palletizing, closing, erecting and labeling cartons. The product has one +/-10V and 14-bit analog input. This device requires the direct connection of its equipment grounding conductor. The unit experiences a temperature change rate of 2%/K during operation. It is cooled by means of forced ventilation. This controller has Type B probe inputs with a maximum allowed input voltage rating of 30V. The product also features a Type 2 relay contact with an ohmic time constant of load.

This device must have its control panel plugged in when it is switched on. The unit has 2ms pulse width for its control section. It has a mains frequency of 50Hz to 60Hz. This controller has separate type plates for its control section and power section. The product comes along with the accessories required to connect and mount it. This device should never have ice mist or moisture condensation on its surface at any time. The unit needs operation with mains voltage is needed at least once a year for an hour when it is stored for an hour. This drive controller portrays backup support for a year from Wake Industrial.

The product comprises adhesive labels with safety notes on its sides. Its placement inside the control cabinet must be done such that there are no heat-sensitive materials near its braking resistors. The product is fitted to the back panel of the closed housing by using two screws with 6Nm tightening torque. This device requires at least a 10mm² cross-section for the external conductors of its mains supply feeder. The unit has three terminals on the X5 connector to connect the motor. This HCS01.1E-W0013-A-02-B-ET-EC-EC-L2-NN-FW drive controller transportation is carried out in rugged packaging to its destination.