Product Description

The HCS01.1E-W0013-A-02-A-CC-EC-EC-L4-NN-FW is a highly advanced electrical converter manufactured by Rexroth Indramat to control the operation of industrial motors by adjusting the current, frequency, or voltage of the electrical energy sent to the industrial motor through the power cable. This electrical converter is manufactured according to international quality standards, before it is delivered to the end user, it is tested and certified to be safe for industrial operation, it is also supplied with documentation that contains instructions on the proper handling of the device. The HCS01.1E-W0013-A-02-A-CC-EC-EC-L4-NN-FW electrical converter does not generate a high amount of noise during operation, this makes it possible for the industrial operator to use the converter at any time without the risk of environmental disturbance.

The HCS01.1E-W0013-A-02-A-CC-EC-EC-L4-NN-FW electrical controller regulates its operational temperature via forced ventilation, it features an internal air blower that generates the internal air necessary for this temperature regulation process. The configuration and installation of this electrical converter very safe and straightforward, however, this should be carried out by highly trained engineers who are familiar with Rexroth Indramat devices and have gone through the documentation supplied with the controller. The HCS01.1E-W0013-A-02-A-CC-EC-EC-L4-NN-FW electrical converter is not supplied with a firmware module, however this can be separately ordered by the industrial operator.

The HCS01.1E-W0013-A-02-A-CC-EC-EC-L4-NN-FW electrical motor features two multi-encoder interfaces and a SERCOS III master communication interface which controls the exchange of digital information between the controller and all other parts of the industrial servo system. This converter also features the Safe Brake Control and Safe Torque Off integrated safety technology, the two integrations provide the industrial operator with an additional layer of protection when handling the converter. The mains connecting voltage suitable for this electrical converter falls between 110 to about 230 volts.