Product Description

HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW is an industrial drive controller. It is especially designed for applications that require precise motor control. Under optimal operating conditions, the HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW can deliver 9 Amps output. The input voltage range is 110 to 230 Volts AC. Bosch has designed the controller for connection to three-phase AC systems. The controller has an enclosure with IP20 protection rating. This rating implies protection from solids with 12 millimeter dimensions. However, the enclosure does not protect against dust or liquid ingress. Especially for outdoor use, it must be mounted inside a control cabinet. The recommended method is to attach the rear side of the controller to the mounting surface. If there are any space restrictions, operators can mount the unit by attaching either the left side or the right side to the mounting surface.

Resistors installed near the back side of the HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW get heated during operation. Therefore, operators must ensure that any adjacent devices are installed with a suitable amount of separation. The ambient temperature should be between 0 and 40 degrees Celsius. Higher ambient temperatures lead to output derating. Bosch allows controller use at ambient temperatures of up to 55 degrees Celsius. Bosch has designed the HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW for convection cooling. The controller supports SERCOS master communication. The SERCOS interface can be used for cross-connections to other devices. The HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW is also equipped with a Profibus module. A multi-encoder interface allows controller use with several types of motor encoders. Firmware for the HCS01.1E-W0009-A-02-A-CC-EC-PB-NN-NN-FW has to be ordered as a separate item. The controller works with a standard control panel that does not support hot-plug. Only qualified and trained professionals must be allows to handle and operate the controller.