Product Description

The Bosch Rexroth HCS01.1E-W0009-A-02-A-CC-EC-PB-L4-NN-FW is an IndraDrive series controller. It is based on an advanced control section. The controller has an IP20-rated housing that cools via convection cooling. The controller dissipates 12 Watts as heat during operation. The inlet for cool air is located at the bottom side of the unit. The outlet for heated air is located at the top side of the unit. Operators must use air conditioning or large cabinets to ensure adequate ambient temperature. The recommended temperature for operation with rated data is 0 to 40 degrees Celsius. The controller can be used at ambient temperatures of up to 55 degrees Celsius. However, the output derates at ambient temperatures between 40 and 55 degrees Celsius. The minimum recommended distance at the top and bottom of the controller must be 90 millimeters. The recommended horizontal spacing is 10 millimeters.

The spacing recommendations help to ensure smooth air flow, which is essential for proper cooling. Shipping weight of the HCS01.1E-W0009-A-02-A-CC-EC-PB-L4-NN-FW is 1.3 kilograms. The device height is 215 millimeters, its depth is 196 millimeters and its width is 50 millimeters. The insulation resistance at 550 Volts DC is 10 megaohms. The capacitance against the housing is 2 x 68 nanofarads. The HCS01.1E-W0009-A-02-A-CC-EC-PB-L4-NN-FW is designed for 110 to 230 Volts AC (three-phase) input. The peak output rating is 9 Amps. Features supported by the HCS01.1E-W0009-A-02-A-CC-EC-PB-L4-NN-FW include SERCOS master communication, a multi-encoder interface, a Profibus communication interface and a safety module that supports safe torque off and safe brake control. The HCS01.1E-W0009-A-02-A-CC-EC-PB-L4-NN-FW is compatible with a standard control panel that does not support hot plug. Operators must order the controller firmware as a separate item.