Product Description

The HCS01.1E-W0009-A-02-A-CC-EC-EM-S4-NN-FW drive controller provided by Bosch Rexroth can cause injury due to shearing, crushing, hitting and cutting. This drive controller incorporates monitoring functions in its components to avoid malfunctioning. The product is meant for operation only in its original state without structural modifications. This device needs to be prevented from unintended startup by isolating its power connection with a safe starting lockout or OFF switches or buttons. The unit operation is not allowed near radio and remote control equipment. Its installation machine should not be operated if the emergency stop switch is not working. This controller is made to function in the semiconductor industry for solar cell production.

The product must comprise at least a 90mm clearance distance above and below it inside the control cabinet. This device houses an air inlet at its bottom and an air outlet at the top. The unit cannot have any material that is insensitive to the occurring high temperatures over it. It is highly utilized for electronic wafer production and handling, cleaning and metalizing. The controller cannot be mounted on either the top or bottom surface of the associated control cabinet. This HCS01.1E-W0009-A-02-A-CC-EC-EM-S4-NN-FW drive controller is accompanied by backup support for one year.

The product works only with third-party motors that have the required minimum inductance and are protected against an inadmissible rise in temperature when there is an overload. This device has 5% to 95% relative humidity during operation, storage and transportation. The unit installation elevation must never exceed 4000m over sea level. Its firmware supports various methods to determine commutation offset that is to be set during commissioning for third-party synchronous motors with motor encoder. This controller portrays the 3K climatic category during operation as per IEC 721 standards. The device depicts reduced output performance when the ambient installation altitude and operating temperature are exceeded. This drive controller delivery is undertaken by trustworthy logistics agents with a worldwide presence.