Product Description

The HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-FW is an 8 Amps rated drive controller. Its input rating is 200 to 500 Volts AC (three-phase). The HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-FW is based on a basic control section that supports several features including Multi-Ethernet communication, a multi-encoder interface, encoder emulation, freely configurable digital inputs and outputs, and an analog input. The controller has slots for optional modules. The first slot is equipped with a module that features an engineering port. The second slot is equipped with a safety module that supports safe motion bus. A standard control panel is supplied with the controller. It attaches to the front of the controller. This type of control panel does not support hot plug. Advanced control panels that support hot plug are available for HCS controllers. Shipping weight of the controller is approximately 1.3 kilograms.

The IP20 rated HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-FW is designed for control cabinet mounting. Its height is 215 millimeters, its depth is 196 millimeters and its width is 50 millimeters. The specified horizontal minimum distance refers to the distance to neighboring devices or equipment installed in the control cabinet. Bosch does not require horizontal spacing for the HCS01.1E-W0008-A-03-B-ET-EC-EP-SB-NN-FW controller. Back-side mounting is the standard and should be used, if possible. Right-hand or left-hand mounting is permitted if the mounting clearance between control cabinet wall and control cabinet front is not sufficient for back-side mounting. The controller dissipates heat via forced-air cooling. The permitted ambient temperature is 0 to 40 degrees Celsius. Mounting accessories are supplied with the controller and include screws for mounting the components, screws for connecting the equipment grounding conductor, parts for shield connection of cables and parts for shield connection of module bus cables.