Product Description

The Bosch HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW is a drive controller. It is designed for motor control in industrial applications. The power section on the controller accepts three-phase AC input at 200 to 500 Volts AC input. Full rated output of the HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW is 8 Amps. The output derates if the operating conditions deviate from those specified by Bosch. The ambient temperature should be between 0 and 40 degrees Celsius. The installation site elevation should be between 0 and 1000 meters. The maximum permitted temperature with derated output is 55 degrees Celsius. The maximum permitted installation site elevation with derated output is 4000 meters. Mass of the HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW is approximately 1.3 kilograms. The device height is 215 millimeters, the depth is 196 millimeters and the width is 50 millimeters. The rated insulation resistance is 10 megaohms.

The capacitance against housing is 2 x 68 nanofarads. Switching frequencies supported by the HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW range from 4 to 16 kilohertz. The cooling method used for heat dissipation is natural convection. Bosch recommends minimum 90 millimeters spacing on the top of the unit, 90 millimeters on the bottom of the unit, and 10 millimeters horizontal spacing between adjacent devices. Only materials that are not combustible and are insensitive to the occurring high temperatures should be placed near the top of the unit. The HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW is available in an IP20 rated housing. Integrated controller features include a multi-encoder interface and Multi-Ethernet communication. Optional features on the HCS01.1E-W0008-A-03-B-ET-EC-DA-NN-NN-FW include a digital/analog I/O module. The controller control section has a basic design. A standard control panel can be used to monitor and configured the drive controller. Only qualified and experienced personnel should install, commission, operate and service the controller.