Product Description

Bosch Rexroth's products are famous for their ability to simultaneously cut maintenance costs while increasing productivity and profitability. Drive controllers, servo drives, analog amplifier cards, servo amplifiers, and power supply modules are backed by a performance guarantee.

The HCS01.1E-W0006-A-02-B-ET-EC-EP-L3-NN-FW model includes a basic control section and a multi-ethernet communication module. The model has an insulation resistance of 10 Mohms and is deployable up to 1000 meters above sea level. The drive controller has a maximum current rating of 6 A, whereas the output current rating is 2 A. The frequency range of the feed power supply module must be between 50 and 60 Hz. The HCS01.1 drive controller is 50 millimeters wide, 215 millimeters tall, 196 millimeters deep, and operates between 0 and +40 degrees Celsius. This device requires an input voltage range of 200 V to 500 V with a 10% tolerance. The model is easy to install and place owing to its compact size and uniform appearance. The control voltage rating for this model is 24 volts DC. It is only compatible with three-phase power sources. The HCS01.1 drive controller has a resistance to solid particles rated at IP 20. However, it must be kept in a control cabinet with sufficient environmental protection.

The model HCS01.1E-W0006-A-02-B-ET-EC-EP-L3-NN-FW contains an engineering port interface 2 and an L3 STO interface 3. The model is intended to be cooled by a blower/fan that circulates forced air and is equipped with a multi-encoder interface 1. This 1.30-kilogram drive controller has a housing capacitance of 2 x 68 nF. This model (HCS01.1E-W0006-A-02-B-ET-EC-EP-L3-NN-FW) of drive controller is intended for use in industrial automation applications, including chemical and process equipment, hoist and conveyor systems, and packing machines.