Product Description

The HCS01.1E-W0006-A-02-B-ET-EC-EM-S4-NN-FW drive controller provided by Bosch Rexroth has a mains frequency of 50Hz to 60Hz with a tolerance of +/-2Hz. This drive controller also has relative humidity ranging between 5% and 95%. The product installation in the control cabinet with a fan is possible only if there are filters at the air intake opening. This device should at no time have materials that are combustible or sensitive to occurrences of high temperatures over it. The unit features a pulse-shaped leakage current. It is mandatory to execute a compatibility test between the controller housing and cleaning agents or new lubricants.

This controller portrays a short circuit current rating of 42000Arms. The product is protected against fire hazards when there is a short circuit by means of a fuse. This device can incorporate only accessories with the approval of the manufacturer. The unit plays a key role in semiconductor, wafer or solar cell production as well as handling, cleaning and metalizing them. It must be ensured that there is no jamming or crushing during its handling. This controller has one combined input/output that can be configured as either a digital input or a digital output. The product permits free configuration of its digital inputs or outputs. This drive controller comes along with backup support for a year and can be sent across the globe.

The device is at risk of damage to its components due to long-term storage. This unit supports 1g/m³ to 60g/m³ absolute humidity during transport and 1g/m³ to 29g/m³ absolute humidity during storage. It is essential to observe the minimum mounting distances inside the associated closed housing. The controller should portray immediate contact with the wall of the control cabinet with left or right-side mounting. This product is mounted inside a control cabinet using two M6 x 20 screws. The device and the motor encoder are connected through the X4 15-pin female D-Sub connector.