Product Description

The HCS01.1E-W0005-A-03-B-ET-EC-PB-L3-NN-FW drive controller by Bosch Rexroth can be used with MSM, MCL, MSK and MS2N range of motors from the manufacturer. This controller is largely utilized in machine tools as well as secondary and servo drives. The product has one combined I/O that allows configuration as either a digital input or a digital output. The basic device has an engineering port. The unit features dimensions of 215 x 50mm (H x W). It supports optional encoder emulation. The controller has a 01 series code. The product encompasses a control panel fitting with four keys and a single-line display. The device is not meant for utilization in residential environments with a low-voltage mains supply.

The controller needs proper mounting and installation to be done for its safe operation. The unit can cause burns if the hot surface is made contact with bare hands. Its components comprise high electric voltage when the power has been switched ON. The product shows dangerous movements due to defective components or malfunctioning sensors in the related motor. The device needs to be free from the power supply for maintenance and repair work. The unit handling is intended to be done using lifting tools and equipment correctly. This HCS01.1E-W0005-A-03-B-ET-EC-PB-L3-NN-FW controller is associated with a one-year warranty.

The product incorporates a three-phase mains supply. The device renders Safe Torque Off integrated safety technology. This unit supports functioning with motors from other manufacturers only if the motor has an integrated temperature sensor. Its firmware must be obtained as a separate item. The controller shows reduced performance if the ideal operating conditions are over permissible limits. This product has IP 20 protection class as per IEC 529 specifications. The device portrays 0.15mm amplitude between 10Hz and 57Hz. The unit may get destroyed if there is unclean air in the cabinet. This controller is dispatched to the desired address anywhere across the globe.