Product Description

The HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-PW Bosch Rexroth drive controller sports a standard design. This controller is utilized in machine tools. The product depicts an IP 20 degree of protection. The device works equally well with the manufacturer and third-party motors. The unit is sized at 50 x 215mm. It does not support single-phase operation. The controller houses analog inputs. This product comes with a series code of 01. The device might cause personnel injury due to improper use. The unit installation is prohibited in a damaged or faulty state. It can be operated with only the manufacturer’s spare parts and accessories. The controller exhibits derated performance if the ambient operating conditions are exceeded.

The product can cause electric shock if its components are used improperly or safety instructions are not followed. The device implements Safe Motion integrated safety technology. The unit operation and/or installation is prohibited in the faulty state. Its installation needs to be done only in the specified position recommended for normal use. The controller connection must be done only with the manufacturer’s cables or cables that have the manufacturer’s approval. This product is meant to be installed in adherence to the EMC requirements. This controller is available with a year’s Wake Industrial warranty.

The device and its components are not to be operated near remote control and radio equipment. The unit has the possibility of causing burns when its hot surface is touched. Its electrical connection points must not be touched when the power is turned ON. This controller needs protection against jamming and crushing to be implemented during handling and mounting by taking appropriate measures. The product is free of any materials that have a negative influence on the environment during its operation. This device helps in encoder evaluation by means of a multi-encoder interface. This controller dispatch is done in military-grade packaging to avoid damage during transit.