Product Description

The Bosch Rexroth HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW is a drive controller. It is compatible with a range of Bosch motors including the MSK series, the MSM series, the MCL series, the MS2N series, and several third-party motors. The control section on the HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW has a basic design. The power section on the controller is compatible with 3-phase AC input at 200 to 500 Volts AC. The maximum output current of the controller is 5 Amps. The HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW is available in an IP20 rated enclosure that is designed for vertical mounting. The slots on the controller allow installation of plug in modules. The plug in modules installed on the HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW include a multi-encoder interface, and engineering port and a safety module that supports safe motion. The communication interface on the controller is Multi-Ethernet.

The HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW controller works with a standard control panel. The controller firmware needs to be ordered separately. Three separate type plates are attached to the controller. The type plate for the device identifies controller hardware features. The firmware type plate identifies the installed firmware. The control panel type plate identifies the control panel installed on the controller. The recommended ambient conditions for controller storage are -20 to 55 degrees Celsius temperature and 5 to 95% relative humidity. The recommended ambient conditions for controller transportation are -20 to 70 degrees Celsius temperature and 5 to 95% relative humidity. Moisture condensation and icing are not permitted for controller storage or transport. The HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW dissipates heated air inside the cabinet. The permitted ambient temperature range for controller operation is 0 to 40 degrees Celsius. Height of the HCS01.1E-W0005-A-03-B-ET-EC-EP-S5-NN-FW controller is 215 millimeters and its width is 50 millimeters.