Product Description

The HCS01.1E-W0005-A-03-A-CC-EC-PB-NN-NN-FW is an industrial electrical converter manufactured by Rexroth Indramat to provide industrial operators with a reliable way of accurately controlling the operation of synchronous, asynchronous, and linear motors used in the industrial servo system. This converter is made from a combination of trusted old designs and some of the most sophisticated industrial innovations; this unique combination allows the converter to continue to remain at the forefront of the industrial converter series. The HCS01.1E-W0005-A-03-A-CC-EC-PB-NN-NN-FW industrial converter contains a high metal content; this makes it possible for the industrial operator to easily recycle the converter after its service life has been exhausted. This converter also features a PROFIBUS communication interface which controls the exchange of digital information between the converter and all other parts of the servo system.

The HCS01.1E-W0005-A-03-A-CC-EC-PB-NN-NN-FW is not supplied with a firmware module; however, this can be specially ordered by the industrial operator as a separate unit. The control and general operation of this industrial converter are very easy and straightforward; however, this is due to the advanced control panel that is integrated into the housing of the controller. This control panel is suited for hot plugs; it also operates with a single-line display. The display of this converter shows the operating state, command and error diagnosis, and pending warning concerning the converter.

The power supply unit of the HCS01.1E-W0005-A-03-A-CC-EC-PB-NN-NN-FW industrial converter provides it with an input control voltage of about 24 volts and a maximum inrush current of about 3.3 amperes. Also, the pulse width of this converter is about two milliseconds while the input capacitance is about 0.04 millifarad. The maximum permissible installation height for this converter is about 1000 meters above sea level.