Product Description

Bosch Rexroth designs and manufactures cutting-edge drive controllers, drive converters, servomotors, brake resistors, and frequency controllers. Consumers have a good opinion of the company since it offers affordable, high-quality products.

The HCS01.1E-W0003-A-02-A-CC-EC-NN-S4-NN-FW model is intended to be cooled by forced air using an integrated blower/fan and has an output voltage range of 0 to +230 V. Filtration should be used to remove dust and other contaminants from supplied air. The weight of this cutting-edge drive controller from Rexroth Indramat is 1.30 kg. The HCS01.1 drive controller requires an input voltage range of 200 to 500 V with a 10% tolerance. The model contains a multi-encoder interface 1 and is developed for industrial automation applications, such as chemical and process equipment, hoist and conveyor systems, and packing machines. The model features an S4 (safe motion) interface 3 and an IP 20 certification for protection against solid particles. However, it must be housed in an environmentally protected control cabinet. The HCS01.1 drive controller has a maximum current rating of 3 A, while the output current rating is 1.1 A. It is advised that the model use a fed power supply module with a frequency range of 50 to 60 Hz.

The model HCS01.1E-W0003-A-02-A-CC-EC-NN-S4-NN-FW has an insulation resistance of 10 Mohms and is deployable up to 1000 meters above sea level. The model has minimal dimensions of 50 mm x 215 mm x 196 mm (W x H x D) and a temperature operating range of 0 to +40 degrees Celsius. Due to its compact size and standardized design, the drive controller is straightforward to install and place. The control voltage rating for this model (HCS01.1E-W0003-A-02-A-CC-EC-NN-S4-NN-FW) is 24 volts DC, and it is compatible with only three-phase power sources.