Product Description

The Bosch Rexroth HCS01.1E-W0003-A-02-A-CC-EC-ET-L3-NN-FW is a digital drive controller. It is part of the HCS product line that is designed for industrial applications such as food and packaging, printing machines, machine tools and the semiconductor manufacturing. The controller has two main components: a power section and a control section. The control section features slots for optional plug in modules. Three slots on the control section are occupied: slot 1 features a multi-encoder interface, slot 2 features a Multi-Ethernet interface module and slot 3 features a safety module with safe torque off (STO) support. The controller also includes an IEEE 802.3 compatible SERCOS III master interface for cross-connection. The controller also features a standard control panel with a display and keypad that allows monitoring and configuration. The controller cools via natural convection and dissipates heat inside the control cabinet.

Ingress protection rating of the controller is IP20. This means that the controller is not protected from dust or moisture. Therefore it must be mounted inside a suitable cabinet. The controller mounts vertically. Its height is 220 millimeters, its width is 50 millimeters and its depth is 215 millimeters. The input voltage range is 110 to 230 volts AC. Three-phase input provides rated output and single-phase input provides derated output. The rated output of the HCS01.1E-W0003-A-02-A-CC-EC-ET-L3-NN-FW is 1.1 amps. The peak output of the HCS01.1E-W0003-A-02-A-CC-EC-ET-L3-NN-FW is 3.3 Amps. The controller is well-suited to use with MSM series motors. Some combinations are also possible with MSK motors. Firmware for the HCS01.1E-W0003-A-02-A-CC-EC-ET-L3-NN-FW is ordered separately from the hardware. All relevant safety instruction are detailed in the controller documentation. Trained personnel should implement these safety instructions for prevention of equipment damage and injury.