HCS04.2E-W0590-N-06-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911329247
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS04.2E-W0590-N-06-NNNN is a drive controller in the HCS IndraDrive Controllers series. It operates with an internal and external control voltage of 24 V DC and is cooled by an integrated blower. The unit features protection ratings of IP31 on the front and sides, IP20 on top, and IP00 on the bottom, and supports vertical mounting up to 3,000 meters above sea level.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS04.2E-W0590-N-06-NNNN is produced by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. Formally designated as an HCS drive controller, it converts DC bus energy into regulated three-phase output for synchronous or induction motors used in conveyors, packaging stations, and pick-and-place cells. The device supplies pulse-width-modulated current while coordinating velocity and torque commands from higher-level motion logic, making it a core element in modular industrial automation lines.
The enclosure is segmented for different ingress ratings: the front and side panels achieve IP31, the top cover meets IP20, and the open base is classified as IP00. Because the housing installs in a vertical orientation, the unsealed bottom faces the cabinet's cool air channel while an integrated blower provides internal cooling airflow across the heat sink. Control electronics are fed by a redundant 24 V DC supply that is available both internally and from an external source, and all circuits observe PELV insulation and Protection Class 1 grounding requirements. Operation is permitted at up to 95% RH non-condensing humidity, and the drive is intended for use with a compatible power supply section.
The control section switches at a nominal clock frequency of 4 kHz, enabling fine current resolution that supports output frequencies up to 300 Hz for high-speed spindle or linear motor applications. Power semiconductors and bus capacitors are suitable for use in Category III overvoltage environments typically encountered in industrial distribution panels. The unit maintains full performance to elevations of 3,000 m above sea level without derating, provided ambient conditions stay within the stated humidity limit. Communication hardware is not specified, so fieldbus or encoder connections are selected externally to match the machine architecture, while the PELV scheme keeps control wiring isolated from the mains.
Frequently Asked Questions about HCS04.2E-W0590-N-06-NNNN:
Q: What cooling method is used for the HCS04.2E-W0590-N-06-NNNN controller?
A: The HCS04.2E-W0590-N-06-NNNN drive controller uses internal air cooling through an integrated blower.
Q: What is the maximum output frequency of the HCS04.2E-W0590-N-06-NNNN controller?
A: This controller supports a maximum output frequency of 300 Hz.
Q: What is the recommended mounting orientation for the HCS04.2E-W0590-N-06-NNNN controller?
A: The HCS04.2E-W0590-N-06-NNNN should be installed vertically, as specified for proper operation.
Q: To what altitude can the HCS04.2E-W0590-N-06-NNNN be installed?
A: The maximum installation altitude for this model is 3,000 meters.
Q: What levels of environmental protection does the HCS04.2E-W0590-N-06-NNNN provide?
A: Front and lateral sides of this controller have IP31 protection while the top is IP20 and the bottom is IP00.
