HCS04.2E-W1240
- Stock: Call for Quote
COVID-19 Update: Wake Industrial is open and available to support your automation needs.
This company was fantastic to work with! Very patient with us to make sure we ...
~ Carla Morgan Excellent Kentucky, USANext day air shipping and we are up and running!! Thanks so much!
~ Jeanne Wolter Excellent Colorado, USAWe asked for a fast turn around and Wake was up to the task!
~ Darrell Chapman Excellent Indiana, USAI contacted Gregg one morning in desperate need of two servos to get our Filler ...
~ Paul Kovacs Excellent California, USAThe service that I received was outstanding!
~ Gary Douglas Excellent Ontario, CanadaUnderstood our situation, and worked to help us get it solved. Very responsive, and stepped ...
~ Brian Tomlin Excellent Arizona, USAWeighing in at 225 kilograms, or almost 500 pounds, the HCS04.2E-W1240 is a member of the CS, or Compact Series, of Bosch Rexroth Indramat drive controller power sections. The HCS04.2E-W1240 in particular is the second largest member of its classification, and that shows in its output capabilities: in exchange for a rated input of 834 amps at 400 to 480 volts tri-phasic AC, the HCS04.2E-W1240 is capable of outputting 894 amps of tightly modulated electricity for the purpose of controlling servo motors. This output comes at a variable voltage, controllable for the needs of your IndraDrive system. Heavy-duty integrated duct cooling, capable of pulling up to 1800 cubic meters per hour through the system, or less if desired, keeps the HCS04.2E-W1240 in a safe operating temperature range--up to 40 degrees celsius with no derating at all--when inside suitable cabinets of at least 600 millimeter depth.
The typical high-power motor on the business end of a HCS04.2E-W1240, when being run in high continuous load conditions, has a rating of 700 horsepower and a power consumption of 500 kilowatts. This gives it the sheer force necessary to power through high-load industrial operations, a specialty of Bosch Rexroth Indramat IndraDrive equipment. While the HCS04.2E-W1240 is a high-output power station by itself, it is also only one of many parts required to create a fully operational IndraDrive factory. The HCS04.2E-W1240 is compatible with a wealth of Bosch Rexroth Indramat components that take transformed power from this CS power section and can turn it into finished products. Its compact, all-in-one design makes the HCS04.2E-W1240 best-suited to single-axis tasks, but it can be combined with other devices to create cost-effective small axis groups as well.
Cooling Mode: | Internal Air |
Direct Power Supply: | 380…480V |
Maximum Current: | 1240A |
Power Range: | 132kW...500kW |
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2021 - Wake Industrial - All Rights Reserved