HCS03.1E-W0210-A-05-NPBV Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332303
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS03.1E-W0210-A-05-NPBV is a drive controller from the HCS IndraDrive Controllers series. It features an internal air cooling method with an integrated blower and operates at a device peak current of 210 Amps. The controller has an IP20 rating and supports mains voltage from 3 x AC 400 to 500 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS03.1E-W0210-A-05-NPBV drive controller is produced by Bosch Rexroth Indramat and belongs to the HCS IndraDrive Controllers series. The unit governs torque, speed, and position control for synchronous and induction motors in multi-axis factory cells, packaging equipment, and material-handling gantries. By combining power electronics and motion control in a single enclosure, it interfaces with higher-level PLCs and delivers regulated three-phase output to connected motors. Its control section coordinates motor response so axes can maintain stable speed regulation and accurate positioning under changing loads. It is intended for panel installation inside electrical cabinets where compact modular controllers fit dense cabinet layouts.
The controller uses internal air cooling through an integrated blower, so heated components are purged by a dedicated fan without drawing air from outside the cabinet. This device is rated for a peak current of 210 A, which supports short-term torque demand during acceleration or shock loading. The enclosure carries an IP20 rating, permitting operation in clean control cabinets while still requiring protection against dust and accidental contact. Incoming mains must fall within 3 x AC 400...500 V +10%, -15%, allowing connection to common industrial power systems. Within that voltage range, the controller covers a continuous output power span of 15 to 75 kW, enabling it to drive medium-sized motors without changing the base hardware.
Within the wider HCS03 line, this unit is assigned design version 1. Energy management is handled through an infeeding/feeding power supply configuration, allowing a shared DC bus to recover regenerated energy from multiple axes instead of dissipating it as heat. The internal logic references voltage code 05, which is used with the controller's supply class and operating range. These identifiers distinguish this controller version within the product line and clarify its electrical grouping.
Frequently Asked Questions about HCS03.1E-W0210-A-05-NPBV:
Q: What cooling method does the HCS03.1E-W0210-A-05-NPBV drive controller utilize?
A: This model uses internal air cooling via an integrated blower.
Q: What is the peak current output of the HCS03.1E-W0210-A-05-NPBV drive controller?
A: The HCS03.1E-W0210-A-05-NPBV can provide a device peak current of 210 A.
Q: What level of enclosure protection does the HCS03.1E-W0210-A-05-NPBV offer?
A: It is rated for IP20 protection, offering basic protection against solid objects greater than 12.5 mm.
Q: What mains voltage does the HCS03.1E-W0210-A-05-NPBV operate on?
A: This drive controller supports a mains voltage range of 3 x AC 400 to 500 V with a tolerance of +10% to -15%.
Q: What is the power range of the HCS03.1E-W0210-A-05-NPBV drive controller?
A: The HCS03.1E-W0210-A-05-NPBV has a power range capability from 15 to 75 kW.
