Product Description:

The HCS03.1E-W0210-A-05-NNNN is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Within an automation cell, it regulates three-phase induction or synchronous motors by converting plant AC mains into a controlled output that follows commanded torque, speed, or position profiles. The unit belongs to design version 1 of the HCS03 line and is suited for conveyor sections, packaging axes, and material-forming stations that require coordinated multi-axis motion. Its control role allows one drive platform to support both steady-speed operation and dynamic axis movement where rapid changes in load or direction are common.

This controller accepts a rated supply of 3 × AC 400 to 500 V (+10%, -15%), so it can be connected directly to common 480 V plant feeders used in both European and North American facilities. Internal power devices are cooled by an integrated blower, which removes heat without external ductwork and helps the unit maintain stable thermal conditions inside a cabinet. A device peak current of 210 A is available for acceleration bursts, helping the connected motor overcome high inertial loads without immediately reaching current limiting. The housing has an IP20 rating, so the controller is intended for enclosed installation where it is protected from direct contact with water and other external contaminants.

The unit covers a continuous output range of 15 to 75 kW, allowing the same controller class to serve a broad range of machine sections without moving into a larger platform. Its energy interface is listed as infeeding and fed operation, meaning the module can return regenerative power to the DC link and also draw from it during motoring. The unit uses voltage code 05, which matches the specified mains window for the power section and associated control circuits. It is part of the HCS03 line, a medium-power platform used where compact cabinet integration and coordinated multi-axis operation are required.