HCS03.1E-W0210 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS03.1E-W0210 is part of the HCS IndraDrive Controllers series. This HCS Drive Controller features a device peak current of 210 Amps and covers a power range from 15 to 75kW. It uses air cooling through an integrated blower and serves as an infeeding or feeded power supply unit.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS03.1E-W0210 drive controller is manufactured by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. Within an automation cell, it receives setpoint data from higher-level control, converts incoming three-phase power to a regulated DC bus, and supplies pulse-width-modulated output to connected motors. This closed-loop regulation allows machine axes to accelerate, decelerate, and hold position with the repeatability required in packaging lines, material-handling gantries, and metal-working centers.
Its peak current rating is 210 A, which is the maximum short-term output the inverter stage can deliver during rapid load changes or dynamic braking. The controller accommodates motor and supply combinations whose continuous mechanical demand falls between 15 to 75 kW, so one housing can serve multiple machine sizes. Cooling is provided by internal air cooling, which drives air through the heat sink with an integrated blower and eliminates the need for external ducting. For energy flow on the common DC link, the power section is configured for infeeding and regenerative operation, meaning it can draw power from the mains or return regenerative energy without external choppers. The unit is built in version 1, with first-generation design and connector layout.
The module is part of the HCS03 line and shares mounting dimensions, bus connectors, and parameter structures with other members of the HCS IndraDrive Controllers series. Uniform control modules permit synchronous release of safety and diagnostic functions across axes in the same system. When specified as an HCS Drive Controller, the unit can act as the central feeder that conditions the DC bus or as a driven axis that takes energy from another supply while preserving identical real-time control loops and fieldbus telegrams.
Frequently Asked Questions about HCS03.1E-W0210:
Q: How is the HCS03.1E-W0210 drive controller cooled?
A: The HCS03.1E-W0210 utilizes internal air cooling with an integrated blower.
Q: What is the peak current supported by the HCS03.1E-W0210 model?
A: This drive controller has a device peak current of 210 A.
Q: What is the power output range of the HCS03.1E-W0210 drive controller?
A: The power range for this unit spans from 15 to 75 kW.
Q: What type of power supply unit does the HCS03.1E-W0210 support?
A: It supports both infeeding and fed power supply units.
Q: What design version is the HCS03.1E-W0210 drive controller?
A: The HCS03.1E-W0210 belongs to design version 1.
