HCS03.1E-W0150-A-05-NPBV-AA
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331175
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The HCS03.1E-W0150-A-05-NPBV-AA servo drive controller delivers a rated power output of 15 kW, operates at a nominal current of 38 A, and features internal air cooling. Part of the HCS IndraDrive Controllers series by Bosch Rexroth Indramat, it supports SERCOS communication, has IP20 protection, and weighs 48 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS03.1E-W0150-A-05-NPBV-AA Drive Controller is created by Bosch Rexroth Indramat company. It supports a three-phase mains connection for continuous power input in industrial automation systems. The device does not allow a single-phase connection under any condition. It is configured for reliable industrial automation systems and electric drive setups.
The HCS03.1E-W0150-A-05-NPBV-AA drive controller operates without any rotary field condition present. The fundamental power factor with a choke reaches up to 0.94. Without the choke, the fundamental power factor reduces to a value of 0.70. The HCS03.1E-W0150-A-05-NPBV-AA drive controller works efficiently when paired with the assigned mains choke model 0240-N0106-A-500-NNNN. It supports a mains input voltage range of 3AC 400 to 500 V. The voltage tolerance is within +10 percent and -15 percent. The input mains frequency range is between 50 and 60 Hz. The supported frequency deviation is limited to ~2 Hz. The power factor is measured as 0.81 with a mains choke. This total power factor drops to 0.61 Nm. The drive controller draws a continuous mains input current of 106 A from the DC power supply. Its maximum inrush current value is rated at 5.7 A.
The HCS03.1E-W0150-A-05-NPBV-AA drive controller supports a mains power connection of 72.9 kVA at 400 V with the HNL01.1E module. Without the HNL01.1E module, the rated power connection is 54 kVA at the same voltage. The unit delivers consistent drive performance across varying operational demands. The internal DC bus capacitance is rated at 1.88 mF. The braking resistor switch-on threshold lies between 820 and 850 volts. It ensures stable control in three-phase motor applications. The compact configuration allows it to support medium to high energy systems. It meets the requirements for energy-efficient operation and electrical compliance.
Frequently Asked Questions about HCS03.1E-W0150-A-05-NPBV-AA:
Q: Why is a choke used with this HCS03.1E-W0150-A-05-NPBV-AA drive controller?
A: The HCS03.1E-W0150-A-05-NPBV-AA drive controller uses a choke to improve power factor and reduce harmonics. It stabilizes power input under varying load conditions.
Q: How does the DC bus capacitance help operation of HCS03.1E-W0150-A-05-NPBV-AA drive controller?
A: In the HCS03.1E-W0150-A-05-NPBV-AA, 1.88 mF capacitance provides energy buffering and voltage stability during high-demand motor activity.
Q: Why only three-phase power is supported by the HCS03.1E-W0150-A-05-NPBV-AA drive controller?
A: The HCS03.1E-W0150-A-05-NPBV-AA controller is optimized for balanced three-phase input to ensure high-efficiency and consistent motor performance.
Q: Why is the 106 A current significant in the HCS03.1E-W0150-A-05-NPBV-AA drive controller?
A: The HCS03.1E-W0150-A-05-NPBV-AA can support high-load motors continuously without thermal overload using a steady 106 A input.
Q: What causes inrush current in this HCS03.1E-W0150-A-05-NPBV-AA drive controller?
A: The HCS03.1E-W0150-A-05-NPBV-AA controller experiences 5.7 A inrush during startup due to capacitor charging and circuit energization.
