HCS03.1E-W0150-A-05-LNBV-AA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331172
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS03.1E-W0150-A-05-LNBV-AA is an HCS Drive Controller in the HCS IndraDrive Controllers series. It supports a power range from 15 to 75 kW and operates at a peak current of 150 Amps. The unit features air cooling with an integrated blower and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS03.1E-W0150-A-05-LNBV-AA is a modular drive controller built by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Installed between the plant mains and the connected servo or spindle motors, it meters power and executes motion commands so automated axes follow programmed profiles precisely. Logic, power electronics, and diagnostic functions are combined in one housing, which simplifies cabinet wiring for production lines, packaging machines, and material-handling cells. It is intended for coordinated motion applications where the controller must regulate torque, speed, and axis response from a central automation system. The controller also provides diagnostic functions needed to monitor operating state and respond to faults.
Thermal performance is handled by internal air cooling, which moves cabinet air through an integrated blower and keeps semiconductor junctions within operating limits. The power stage accepts a three-phase supply of 3 x AC 400–500 V (+10%, -15%), aligning with common plant distribution voltages. During acceleration or torque surges, it can deliver a peak current of 150 A, allowing the drive to overcome high inertial loads without clipping. Continuous output spans 15–75 kW, matching the requirements of medium-size pumps, extruders, and gantry axes. An enclosure rating of IP20 indicates finger-safe access to live parts, but the unit still requires installation inside a protected control cabinet. This cooling arrangement supports use in standard industrial cabinets with managed airflow and proper clearance around the heat path.
Within the HCS platform, the electronics conform to drive line code HCS03. This code keeps the module within the mechanical and interface format used by related units. Hardware set version 1 pairs with voltage identifier 05, which indicates the electrical configuration used by this controller. Power is exchanged with the shared DC link through infeeding and feed operation, allowing regenerated energy from braking axes to be reused by motoring axes instead of being dissipated as external resistor heat. It also supports common DC-bus operation in systems that group several drives on the same power network.
Frequently Asked Questions about HCS03.1E-W0150-A-05-LNBV-AA:
Q: What cooling method does the HCS03.1E-W0150-A-05-LNBV-AA drive controller use?
A: The HCS03.1E-W0150-A-05-LNBV-AA features an internal air cooling system with an integrated blower.
Q: What mains voltage range is supported by the HCS03.1E-W0150-A-05-LNBV-AA?
A: This controller supports a mains voltage of 3 x AC 400 to 500V with a tolerance of +10% and -15%.
Q: What is the peak current rating of the HCS03.1E-W0150-A-05-LNBV-AA?
A: The HCS03.1E-W0150-A-05-LNBV-AA offers a peak device current of 150 A.
Q: What is the power range of the HCS03.1E-W0150-A-05-LNBV-AA?
A: This drive controller has a power range from 15 to 75 kW.
Q: What is the IP rating of the HCS03.1E-W0150-A-05-LNBV-AA controller?
A: The HCS03.1E-W0150-A-05-LNBV-AA has an IP20 protection rating, suitable for indoor environments with limited dust ingress.
